Jetting Question

View previous topic View next topic Go down

Jetting Question

Post  MulletWhip on Mon Dec 07, 2009 8:48 pm

OK,
I've been trying to track the reason for my backfiring of my XR. The valves are in spec. boots, headers, etc are tight. The bike is uncorked with the proper needle and seat, 175 main (I live at ~300 ft), 68S pilot, and Unifilter. What I am finding is as I adjust my pilot screw CW, it makes no difference in idle and as I turn it CCW, the idle begins to drop. This is telling me that my pilot jet is too large. Does this seem right? Is there anyone else running a 65 pilot jet with an uncorked bike at close to sea level? Thanks in advance for any help.

-Mike
avatar
MulletWhip
L Rider

Joined : 2009-04-28

Posts : 10
Location : Santa Rosa, California
XR650R Year : 2000

Back to top Go down

Re: Jetting Question

Post  Dave_o on Tue Dec 08, 2009 3:50 am

Check this out.

http://borynack.com/XR650R/xr650r_caruretor.htm

You might find the exhaust has a leak at some point, probably where the muffler joins the headers, and is sucking a little air on the over-run, mixing with unburnt juice in the exhaust, and going pop. Thats what mine was doing anyway until I hit the joint with some hi-temp silicone.
Still does it now and again though.
...meh...
At least the blue / orange flame looks funky..
avatar
Dave_o
L Rider

Joined : 2009-10-23

Posts : 14
Location : Australia
XR650R Year : 2002

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum